MC Works Dual Edge 643LR (Maroon)

MC WORKS Dual Edge 643LR MAROON (Interpreted by Gabriel Kim from Isofishinglifestyle) 

Designed after feeling the need to build a jigging rod which had a thin blank, light, soft at the top and have a strong backbone. The real fusion was a successful jigging model from MC WORKS, but the rod was bending too much when encountered with larger fish making it difficult to steer those larger fish. Due to the nature of jigging, we cannot choose which fish to hook when fishing. The Dual Edge was designed with a means to counter this problem.

The Dual Edge as the name suggests has both ends of what anglers who jig. A soft tip with a smooth parabolic bend with a powerful butt section of the rod, it is the ultimate weapon when jigging. The centre of gravity was also pushed back towards the reel seat making the rod feel light in the hands of the angler. The grip has also been redesigned so this section doesn’t bend too much, preventing the epoxy mix from cracking. 

Guides: FUJI TITANIUM K GUIDES 

Guide structure:

T-MNST 10-2.2 + T-KLSG 10 + T-KLSG 10+ T-KLSG 12 + T-KWSG 20 + T-KWSG 30

Specifications:

 

Length: 6’4″

Jig Max: 250g

Line: PE2-4

Max Drag: 7kg

Made in Japan 

 

 

History into the making of the MC WORKS Dual Edge low response jigging rod: 

What does it mean to be a rod that can be operated continuously? First of all, it must be absolutely light or easy to operate. Next, it is a rod which is easy to move the jig naturally and does not give unnecessary movement to the jig. With this increase the number of contacts and gave extra movement to the jig, you can save useless physical strength. Although I see an angler who bends the rod strongly and ascertains the strength of the rod and a rod constructor or tester that sells the strength, the ease of fight is multiplied by the pressure of Nambo In the nearby jigging , The priority is not the top. In addition, there is not much need to be too concerned about standing the rod and fighting. For jigging rods, the condition of tips ~ berry and the corresponding length and balance are the most important. 

We have been involved with jigging in the near waters for many years and have seen that reality to the extent disagreeable. In that process, the elements for rods have become clear. That is, “to be able to continue operating” and “easy to take action of eating” These two points are the most important. For those who can fish overseas and favorable conditions similar to that, fighting abilities will come first, but fierce competing ships in the near waters are quite different fishing conditions. 
We developed EVOLUTION and REAL FUSION according to that idea, especially at REAL FUSION, we questioned the world of row response jigging as a style to give results to energy saving. Then, five years have passed.

　Low Response Isism is as thin as possible, evolving tough and rods rods and expanding contact opportunities with targets. On the other hand, the fighting value that depends on the rod power decreases gradually, and the necessity to acquire the fight dependent on the drag with the large fish has also arisen. If one is extremely sharpened, it is inevitable that one parameter decreases to some extent. It is the reality of industrial products. However, high fly dependent on reel drag gives the opportunity of counterattack to the target if not skillful, guidance at the boat edge does not work. 

Realistically it is difficult for beginners to meet with Hiramasa with over 10 kg with REAL FISION with one power. The sharpened rod is the best sword (Yaiba) for experts, but if it can not be handled it is only a razor spilling the blade. 
The concept of DUAL EDGE does not briefly describe the background as “development concept” in our catalog, but in short, it is a low response model which can fight with setting a rod. Of course, if it is over REAL FUSION’s 3 power model or more, it will be possible to fight the rod, but you can feel fearful about the 1-2 power and the sensitivity of the sharp tip section that grabs even the tide changes firmly Is reduced. 

On the other hand, DUAL EDGE gives a tip equivalent to REAL FUSOIN 2 power with 3 powers, while bat sexion has 4 power equivalent, the final limit has more drag tolerance than that. This property, which is impossible in terms of design, becomes a heavy rod which is not usable in conventional designs, or a rod in which the bat section rises too much. The bizarre bending rod has a low limit and has a high risk of breakage.
　I wrote that the fight that set the rod earlier is less important, but the target is beyond the assumed target, and if the angler is not used to dependence on drag, it is an effective characteristic. What I do not want to misunderstand in this rod development is that it is not to create a jigging rod for Hyder’s fighting fight. This is to make it possible to fight a rod in Hydrag while giving a very low repulsion tip equivalent to REAL FUSION’s 2 powers. If you are a strong rod only, no difficulty in designing. 
The product version DUAL EDGE completed on the basis of long tests and considerable fishing data is a good workmanship saying perfection. 
Regarding the carbon composition, we will skip the explanation because there is a part that can not be announced, but we have the property to keep up with the high drag value while maintaining natural bendig. It is its lightness that is superior. In particular, there is no sense of weight. Since the weight mass is concentrated around the reel seat from the butt end, it is a rod which is lighter than the real weight and feels like a low moment. And the grip is designed so as not to bend as much as possible. Although it is difficult to lift psychologically when the grip turns greatly, there is also a side effect of preventing adhesive peeling of the reel seat. 
Afterwards, you only have to use it in actual fishing and enjoy the high drag fight to the extent.